Home | Contact | Site Map | Policy | Legal |
![]() ![]() |
![]() |
Upenders:.
Usage
These units are tilters that tilt a full ninety (90) degrees. It is common to equip one
platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies,
to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer".
Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted
on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.
0 - 90 Degrees of Tilt
• Capacity: 2,000 to 10,000 lbs. • Tilt Degrees: 90 • Min. Platform Width: 48 in. • Min. Platform Length: 54 in. • Max. Platform Width: 60 in. • Max. Platform Length: 72 in. 0 - 90 Degrees of Tilt - V-Deck
• Capacity: 2,000 to 10,000 lbs. • Tilt Degrees: 90 • Min. Platform Width: 48 in. • Min. Platform Length: 54 in. • Max. Platform Width: 60 in. • Max. Platform Length: 72 in. 0 - 90 Degrees of Tilt - Lift & Upender Tables
We have combined the ability to up-end, or position large steel coils, paper rolls or other types of loads with the flexibility of raising and
lowering, into one safe, efficient product. With load capacities ranging from 2,000 - 10,000 lbs., these Lift & Up-ender Tables provide
added flexibility to your material handling challenges. • Capacity: 6,000 lbs. • Tilt Degrees: 90 • Min. Platform Width: 48 in. • Min. Platform Length: 54 in. • Max. Platform Width: 60 in. • Max. Platform Length: 72 in. Special Features and Benefits
• All models have hydraulic return lines on the cylinders to preclude oil weepage. • The controllers are assembled in our U.L. approved panel shop. • All shafts, axles and pins are hard chrome plated. • All bearings are lifetime lubricated. • These units are fully primed and finished with baked enamel. ![]() Print this page |
![]() |
Connect with us...
Weber Company, Inc.
8140 Mayfield Road Chesterland, Ohio 44026 Toll-Free: 800.343.6257 (8-5 EST) Phone: 440.729.0380 Fax: 440.729.0151 |
![]() | Serving Ohio Counties...
Cuyahoga, Lake, Geauga, Ashtabula, Trumbull, Portage, Mahoning, Stark, Summit, Medina, Wayne, Ashland, Lorain, Erie, Huron, Richland, Knox, Holmes, Coshocton, Guernsey, Tuscarawas, Carroll, Harrison, Jefferson and Belmont
|
Pennsylvania Counties...
Allegheny, Beaver, Washington, Green, Fayette, Westmoreland, Lawrence, Mercer, Crawford, Erie, Warren, Forest, Venango, Clarion, Armstrong, Sommerset, Bedford, Fulton, Blair, Cambria, Indiana, Jefferson, Elk, McKean and Cameron
| West Virginia Counties...
Hancok, Brooke, Ohio
and Marshal |
©2012 Weber Company, Inc. All Rights Reserved Created by GoWebLive.com |
Home | Contact | Site Map | Policy | Legal |